Freud SC-001 3-1/2-Inch Blade Stabilizer with 5/8-Inch Arbor for 7-Inch Saws or Larger @ richardeward.com

Freud SC-001 3-1/2-Inch Blade Stabilizer with 5/8-Inch Arbor for 7-Inch Saws or Larger
from Freud

Features:

• An ideal stabilizer for use with saw blades 7-inches in diameter and larger
• Precision-machined and balanced for greater stability and less vibration
• Improves cutting performance
• 5/8-inch arbor

Customer Reviews:

• Avg. Customer Rating: 3.5 / 5.0

• saw blade stabilizer
  Following some of the other review suggestions, I bought the set and installed one plate on my table saw and one on my radial arm saw. Between adding a link belt and the stabilizer to my table saw, I now have virtually no vibration in the table saw. With the radial arm saw being direct drive there was less noticeable difference for vibration, but the saw cut is beautiful. I especially like the 3.5" size of these plates in that they take away very little cutting depth from my 10" saws. I would recommend them... more info

• Not worth it
  I agree with the review that you should stabilize your saw and not your blade, but at some point you are going to want a blade stabilizer. If you do a lot of crosscuts/miters on your table saw it really helps out to give you that "shinny" crosscut. This stabilizer is the worst that could ever have been invented. Who wants to have their blade offset approx 1/4"? There are two stabilizers in the kit and I have yet to see a table saw that you can remove the original flange mounted to the arbor so you don't... more info

• Good product, but know the implications!
  The Freud SC-001 3-1/2-Inch Blade Stabilizer is a well manufactured, simple product. It certainly improves blade stability. The blade feels firmer once installed. However, adding these to your table saw will likely require a large amount of effort that isn't well mentioned in previous reviews, unless I missed it.
  One reviewer recommends adding only a single stabilizer on the outside of the blade. I tried this, out of curiosity, and quickly discovered that this warps the blade by a significant amount,... more info

• Freud Blade Stabilizer
  Useless and overpriced gudget. Blade can't be placed on calibrated 5/8" shaft and sits over the thread. As a result balance is off and you can't turn on a saw without the risk of blowing your brains out.

Accessories:

Similar Products: