All in One Clamp SP 9-Inch X 12-Inch Saw Plate @ richardeward.com

All in One Clamp SP 9-Inch X 12-Inch Saw Plate
from E. Emerson Tool Co

Features:

• Saw tracks perfectly along the straight edge
• Base locks onto the t-track
• Eliminates saw tear out
• Safer to use a hand saw giving you more control

Customer Reviews:

• Avg. Customer Rating: 3.0 / 5.0

• Accurate cuts
  Very nice product. My father uses this in his workshop on oak plywood. The attachments leveraging the T-rail is a very nice touch. No bend over the entire length of it and the clamp holds tightly when cutting.

• Saw Plate is garbage - bad design, wrong plastic
  The saw plate is just a couple of pieces of molded plastic with a few holes drilled though it. Comes with no mounting hardware and tells you that if the holes don't line up with those in the base plate of your saw, drill new ones.
  The plastic is not correct for the application. It is way too sticky. Don't use a large drill bit as a counter sink if you decide to make new holes to fit your saw. Sticky plastic caused drill bit to grab most of the way through counter sink and ride up the bit (I was using... more info

• piece of garbage
  purchased this item thinking it would work wonders, it doesnt slide worth a hill of beans on the track, binds hard to push saw, track system is wonderfull but attatchments are garbage

• Cleaner Quicker more Accurate Cuts
  I found this plate easy to mount as there is a built-in lip to clamp or hold your saw plate against during installation. My installation was fast and true (the squarer the installation the closer your cut width will be to the width of your blade).
  I went out and got an inexpensive but fairly strong (13 amp) circ saw and put a good blade on it so I could keep it permanently mounted thus freeing my good circ saw to do fast free hand cuts when needed. The accuracy of the clamp/guides and plate result in... more info

Accessories:

Similar Products: